@acamso Hey could you please guide how to make spam filter off? Because in the tool it's quite confusing.
I've already set Spam Filter: off, so all emails in Spam folder will be in inbox, right? Or you have to set it to On to make the tool disable spam filter... quite confusing, please explain.
@acamso Yeah indeed. I've tried setting Bypass captcha simulation on CB, and entered a random account on SuperHAC, it says 999 credits, but it always returned Captcha error... And on CB there's no captcha passed to it. If you can work this out it's the best, @Sven is willing to help you with CB integration as he mentioned on the previous page xD
@Glennf - Not at this time; it is on the to-do list.
@AlexR - The solution is mind is an account editor where it will go back into accounts and set up the corresponding catchall. We need to wait and see how the "couple of days" plays out.
5/12/2013: New Update, General Picture, Catchall
Solution
- I want to thank all for the support and
positive feedback thus far. SuperHAC started as a small bot about 2 months ago
and grew into a monster very quickly. Unfortunately, the platform the software
is built on has many limitations. Because of this, I had to remove couple of
things such as the editing tools of the output, etc. in the new version. The
software has been trimmed down in order for it to run as efficient and
effective as possible. Because the software is growing at a a rapid pace, and
is still relatively new, I have had to make many large adjustments to the user
interface, configuration, etc. along the way. Stability is important and I
would like to apoligize for the software changing so much up to this point.
That beind said, this new version marks the end of the large changes and will
stay the way the way it is for a while. I would take the time to really get
familiar with the interface, configuration, etc to get the most of it. Your old
configuration will be deleted upon load and the new configuration with be
compatible from here on out.
- As stated in the last annoucement, Microsoft
has disabled a couple features for new accounts. One of these features is
important to us; catchall/email forwarding. For the time being, catchall
creation has been disabled. According to Microsoft, it takes a "couple
days" after the account is created for the email forwarding feature to be
activated. The workaround for this will be an account editor that will let you
go into each pre-created account and add in the catchall address of your
choice. The catchall username, password, auto-catchall feature, and catchall
folders feature are all still activated and can be used. This ties a bit into
the new custom output editor, which I will get to soon - the catchall username
field allows you to attach the username (as well as the password) of the
catchall to the output so that when you go into the account editor tool a
"couple days" later, the software will automatically detect the
catchall email and edit the account accordingly. The auto-catchall creation
feature will still automatically create a catchall for you. And the catchall
folders feature will still use this catchall (or the catchall your provide) as
the folder name for the output. So in the big picture, not much has changed
aside from the actual addition of the catchall to the account. And again, the
workaround for this will be the account editor, which will be released soon.
- Lets move onto the new main feature of the new
version: custom output editor. Everyone has a different use for SuperHAC. Some
use it for SENuke, some use it for GSA, etc. I receive many requests for
additional outputs each day. Because of this, I came up with the custom ouput
editor as a solution. You can now output in any format you'd like. If the
custom output is not enabled, the default formats will be used. When using
custom outputs, you will most likely need to edit the ouput before importing
into the Account Checker. For more information on this feature, click the help
icon in editor.
- Another new feature is the "spin
emails". You now have the option to create an additional file with all
emails in spin format ({email1|email2|email3}). This file will be saved to the
same folder as the main save file of your choice, or the catchall folder if the
catchall folders feature is enabled.
- HMA support has been discontinued for the time
being. The VPN is not stable enough to work with SuperHAC at the moment. HMA
VPN would often freeze when changing IPs. If you would like to continue using
HMA, set HMA to change IPs automatically from within the software and keep the
thread count of SuperHAC low. Remember, there is a limit of 3 Hotmail accounts
per IP per 24 hours, so once 3 accounts are created on an HMA IP, it needs to
be switched or else you would receive 450 errors. If you figure out exactly how
long it takes to create the 3 accounts based on your configuration, you will
then know what interval to use for the IP change within HMA.
- Some of the fields of the configuration now
have both a checkbox and a text field. You can enter your string into the text
field and then use the checkbox to activate or deactivate the option.
- The clear ouput on run and the clear error log
options have been removed. These will both automatically reset on each run.
- The auto-save feature has also been removed.
The output will be saved no matter what upon both completion and stopping of
the run.
- As stated earlier, most of the output editing
tools have been removed. The main reason for this is because of the release of
the custom output editor. Most of the editing tools were built to function with
just thedefault output, and would not be able to handle/understand all custom
outputs. Along with this, there is no more import file.
- The load log and change log boxes have been
removed. There will still be a changelog upon updating, however, this
annoucements box will be used for receiving the most up-to-date information on
the changes to the software.
- The username punctuation option used to be just
for custom usernames. You can now use this option for all auto-generated
usernames if the custom username feature is not activated.
- The username setup option has been replaced
with the custom username editor. This editor mirrors the custom output editor.
You can now open your word lists within the editor.
- The output can be edited right from within the
output box and saved to the main save file, as always. However, the output box
has now been disabled upon running. This was causing some trouble for some
users. If you would click in the output box during the run in previous
versions, the new ouput would not be displayed correctly.
- To make things easier, the configuration has
been added to the main screen. The main screen now consists of the menu,
account creation configuration, account creation monitor, and the output. The
menu has been moved to the top to create room for the output and configuration.
The account creation configuration has been seperated from the account checker
configuration. The account checker configuration can be found within the
account checker.
- The documentation has been
abandoned. The frequent changes made it hard to keep up. There is a brand new
support desk: http://acamso.com/support
. Please use this for any questions, feature requests, bugs, issues etc. Please
do not email me directly. This will also replace the documentation.
Instructions and information will be frequently added to the support desk for
help.
- There are many other small changes and additions that you will find along the
way. There are many new features coming up, so stay tuned: spam filter checker, catchall checker, gsa
captcha breaker support, account editor, saving of multiple configurations +
lots more. There are a lot of things to be done and I appreciate your patience.
- Again, if you have any questions, feature requests, bug reports, etc, please
open a ticket at http://acamso.com/support.
5/16/2013: 10 Aliases Added, New Save Procedure, Catchall Disabled
- Instead of the usual 5 aliases, 10 aliases can now be created for each account. This is a huge plus with catchall going down (for now).
- There is a new save procedure. A new folder will be created in the account database for each individual run. Within this folder, the entire output will be saved as superhac-output.txt and there will be any file superhac-output-spun-emails.txt that will display all the emails spun together in spintax. If alias creation is turned on, each master account will have its own separate output file and spun emails file.
- Catchall has been completed removed from the program for now. As stated earlier, the workaround for this issue will be an account editor where you can go into pre-created accounts and add in the catchall address.
I've been trying to make a custom output for gsa ser but it seems i can not figure it out. I want the mails in this format. Anyone willing to help me a little bit?
-enhanced account checker: new filters (alias alive/alias dead/failed), ability to append/overwrite when transfering from each filter box, ability to append/overwrite when importing, import file added to monitor, import csv format
-got rid of error reporting on monitor
-ability to append/overwrite when transfering
-removed top banner on all windows to increase load speed
-lowered global wait minimum to 1 sec for fast proxies
-various fixes/changes
4/11/2013 v3.1.2: SMALL UPDATE
-NEW delimiter option
-updated output options GUI
-account checker updated to refelect delimiter option
4/7/2013 v3.1.1: TINY UPDATE
-small GUI fix
4/7/2013 v3.1.0: MAJOR UPDATE
-NEW alias feature: create up to 18 emails per IP per day
-NEW catchall feature: forward all email accounts to one catchall inbox
-enhanced account checker: added multithreading, in-depth monitor, save main textbox function, save alive & dead accounts function, import accounts function
-enhanced error log: added in-depth monitor, more error reporting, save error log function
-updated GUI: added account options, output options, proxy options, resources section, and more
@miren - Any error like that is usually related to the connection.
5/20/2013: POP Rule, Failed Proxies, Catchall Update
- The option to add a POP rule to accounts has been added to the configuration. This allows other software to delete the emails.
- Proxies that result in a connection error are removed from the proxy list (not your proxy file). This speeds up the account creation process; especially when using public proxies.
- The catchall seems to still be locked for newly created accounts. We will give it a couple of days and then move forward with other alternatives.
- Also, after each run in completed or stopped, the output folder will open in your window's taskbar.
@gotkseo - Sure, no problem. If I understand you correctly, you would want the wordlists added to the custom output? Or the name and surname chosen for the sign up form?
Not the wordlists but the name and surname chosen ( from my wordlists ) for the sign up form, because they are chosen randomly. In this way I could have all details in my csv file
I can do this. Just so you are aware though, the wordlists are not usd to generate the actual first and last name for the form. I will add this option soon as well though. So what you are asking is for the word used from each wordlist for each username to be included in the custom output editor.
To all - A new update will be coming within the next couple of days. I would like some feedback on some new features and/or changes you would like to see in the new version. You can reply here or submit a request at http://acamso.com/support
Let web server mode running in CB. You can try this steps: 1. In CB enable Decaptcher on port 80 . 2. In CB enable Hotmail captcha solving (under email category in CB). By default, it's not enabled. 3. In SuperHac add Decaptcher as captcha service. 4. Set retries to 30 or any high figure.
Hotmail is hard to solve captcha. Sometimes it solves at 3-5 retries. On my first run using this method I got 10 accounts in max 2 minutes.
On how many systems can we use? For example, what if I want to change my VPS tomorrow and run it in a new one? An idea on how the licensing system works would be great.
I downloaded your demo but it's really giving me a hard time. The options are not clickable or working, for example, selecting or checking a checkbox makes them unselect the checkbox automatically. When I click on "Captcha Setup" it does nothing too. Basically all options are bugged.
Can't really think to buy when even the 1 day trial is giving hard time to even get started.
How can this problem be curbed?
Thank you.
-------
edit: I saw an option for flash and installed it and now it seems to work fine (tested options, not real creation yet). Didn't knew this ran on flash mainly. However I had flash installed but don't know why it didn't worked.
Sorry if this is a stupid question. I'm looking into an email account creator and saw this and Account Creator Plus. What is the difference between the two?
@Pratik - As of now, the licensing system only allows one computer, however if you need it on a VPS, or change VPS etc. I wouldn't mind changing the license for you. Just submit a support ticket. The options don't use flash. Let me know if you are still experiencing difficulties and I'll take a look via Teamviewer.
I don't have much knowledge when it comes to integrating new captcha services into the platform the bot was created on (UBot). Because of this, there is no timetable for CB integration, and will require some extra time and work to make it possible. Sorry about that guys. The only alternative for now is DBC.
It indeed is related to flash. I had to close it via task manager few times due to it getting stuck when I ran about 50 threads or so (strange, GSA goes well above 300 easily, I can see it opens browser.exe for each thread maybe and that's the reason, not sure if it makes http requests as I can see it launching separate webbrowser for each thread).
When I opened it after force close, the options were still unusable and were unticked as soon as I ticked them, but after installing flash again every time, they worked. Perhaps the "Install Flash" option in the Help Tab in the menu area explains that it does indeed need flash enabled, however, I've to do this currently every time I start it.
Comments
What the difference between Account Creator+ and SuperHac, could you do a comparison
@AlexR - The solution is mind is an account editor where it will go back into accounts and set up the corresponding catchall. We need to wait and see how the "couple of days" plays out.
5/12/2013: New Update, General Picture, Catchall Solution
- I want to thank all for the support and positive feedback thus far. SuperHAC started as a small bot about 2 months ago and grew into a monster very quickly. Unfortunately, the platform the software is built on has many limitations. Because of this, I had to remove couple of things such as the editing tools of the output, etc. in the new version. The software has been trimmed down in order for it to run as efficient and effective as possible. Because the software is growing at a a rapid pace, and is still relatively new, I have had to make many large adjustments to the user interface, configuration, etc. along the way. Stability is important and I would like to apoligize for the software changing so much up to this point. That beind said, this new version marks the end of the large changes and will stay the way the way it is for a while. I would take the time to really get familiar with the interface, configuration, etc to get the most of it. Your old configuration will be deleted upon load and the new configuration with be compatible from here on out.
- As stated in the last annoucement, Microsoft has disabled a couple features for new accounts. One of these features is important to us; catchall/email forwarding. For the time being, catchall creation has been disabled. According to Microsoft, it takes a "couple days" after the account is created for the email forwarding feature to be activated. The workaround for this will be an account editor that will let you go into each pre-created account and add in the catchall address of your choice. The catchall username, password, auto-catchall feature, and catchall folders feature are all still activated and can be used. This ties a bit into the new custom output editor, which I will get to soon - the catchall username field allows you to attach the username (as well as the password) of the catchall to the output so that when you go into the account editor tool a "couple days" later, the software will automatically detect the catchall email and edit the account accordingly. The auto-catchall creation feature will still automatically create a catchall for you. And the catchall folders feature will still use this catchall (or the catchall your provide) as the folder name for the output. So in the big picture, not much has changed aside from the actual addition of the catchall to the account. And again, the workaround for this will be the account editor, which will be released soon.
- Lets move onto the new main feature of the new version: custom output editor. Everyone has a different use for SuperHAC. Some use it for SENuke, some use it for GSA, etc. I receive many requests for additional outputs each day. Because of this, I came up with the custom ouput editor as a solution. You can now output in any format you'd like. If the custom output is not enabled, the default formats will be used. When using custom outputs, you will most likely need to edit the ouput before importing into the Account Checker. For more information on this feature, click the help icon in editor.
- Another new feature is the "spin emails". You now have the option to create an additional file with all emails in spin format ({email1|email2|email3}). This file will be saved to the same folder as the main save file of your choice, or the catchall folder if the catchall folders feature is enabled.
- HMA support has been discontinued for the time being. The VPN is not stable enough to work with SuperHAC at the moment. HMA VPN would often freeze when changing IPs. If you would like to continue using HMA, set HMA to change IPs automatically from within the software and keep the thread count of SuperHAC low. Remember, there is a limit of 3 Hotmail accounts per IP per 24 hours, so once 3 accounts are created on an HMA IP, it needs to be switched or else you would receive 450 errors. If you figure out exactly how long it takes to create the 3 accounts based on your configuration, you will then know what interval to use for the IP change within HMA.
- Some of the fields of the configuration now have both a checkbox and a text field. You can enter your string into the text field and then use the checkbox to activate or deactivate the option.
- The clear ouput on run and the clear error log options have been removed. These will both automatically reset on each run.
- The auto-save feature has also been removed. The output will be saved no matter what upon both completion and stopping of the run.
- As stated earlier, most of the output editing tools have been removed. The main reason for this is because of the release of the custom output editor. Most of the editing tools were built to function with just thedefault output, and would not be able to handle/understand all custom outputs. Along with this, there is no more import file.
- The load log and change log boxes have been removed. There will still be a changelog upon updating, however, this annoucements box will be used for receiving the most up-to-date information on the changes to the software.
- The username punctuation option used to be just for custom usernames. You can now use this option for all auto-generated usernames if the custom username feature is not activated.
- The username setup option has been replaced with the custom username editor. This editor mirrors the custom output editor. You can now open your word lists within the editor.
- The output can be edited right from within the output box and saved to the main save file, as always. However, the output box has now been disabled upon running. This was causing some trouble for some users. If you would click in the output box during the run in previous versions, the new ouput would not be displayed correctly.
- To make things easier, the configuration has been added to the main screen. The main screen now consists of the menu, account creation configuration, account creation monitor, and the output. The menu has been moved to the top to create room for the output and configuration. The account creation configuration has been seperated from the account checker configuration. The account checker configuration can be found within the account checker.
- The documentation has been abandoned. The frequent changes made it hard to keep up. There is a brand new support desk: http://acamso.com/support . Please use this for any questions, feature requests, bugs, issues etc. Please do not email me directly. This will also replace the documentation. Instructions and information will be frequently added to the support desk for help.
- There are many other small changes and additions that you will find along the way. There are many new features coming up, so stay tuned: spam filter checker, catchall checker, gsa captcha breaker support, account editor, saving of multiple configurations + lots more. There are a lot of things to be done and I appreciate your patience.
- Again, if you have any questions, feature requests, bug reports, etc, please open a ticket at http://acamso.com/support.
Use promo code "GSASER" to get SuperHAC for only $27.97!
To all - A new update will be coming within the next couple of days. I would like some feedback on some new features and/or changes you would like to see in the new version. You can reply here or submit a request at http://acamso.com/support
Thanks!
Please but this on top priority.
Let web server mode running in CB.
You can try this steps:
1. In CB enable Decaptcher on port 80 .
2. In CB enable Hotmail captcha solving (under email category in CB). By default, it's not enabled.
3. In SuperHac add Decaptcher as captcha service.
4. Set retries to 30 or any high figure.
Hotmail is hard to solve captcha. Sometimes it solves at 3-5 retries.
On my first run using this method I got 10 accounts in max 2 minutes.
Thanks.
How can i add POP rule and Add Inbox rule to external created hotmail accounts
I have a lot of hotmail accounts who need to modified to: "Add Inbox Rule" and "Add POP Rule"
Thanks for help
Rgds Marc
(myEmail) (my private proxy) - Captcha Error
(myEmail) (my private proxy) - 130 Error
(myEmail) (my private proxy) - 130 Error
(myEmail) (my private proxy) - 130 Error
(myEmail) (my private proxy) - Sign Up Error 450