i have read all suggestion that you give in this froum and thank you so much for useful info. i have few questions..
1. How to delete profile links from T1? because i don't want to build T2 for profile links 2. how to see log of any particular project? 3. verification setting for different Tiers.. T1 - automaticaly (also Tick on re-verify existing backlink) T2 - custom time 5000 minutes (Tick on don't remove urls (check hint)) is that right? and please Tell me how to setup verification setting for T3 and kitchen Tiers.?
What should you make your keyword % anchor text in all the other tiers outside of T1 ? I have never really figured that out. Should you even still bother using your keywords?
@Ron Thank you for reply ! So simply put keep the anchors from tier 1 ad LSI's as secondary , spun all of them and use on all project tiers ? Os that the way ?
@baba - You can delete any links you want by right clicking on project, show urls>verified, and then highlight and delete whatever you want. The log is universal, not by project - or at least I thought so. T1T2T3 I set to automatic 1440, T1AT2AT3A I have it disabled and do it myself once a week. Just click the box to arrive at 'disabled'.
@dimitribanks - I use the same anchors completely throughout the project. This can include secondary anchors as well. I want the theme to be the same at all levels. Yes, you can always expand the anchors to a bigger list, just make sure they are thematically related.
@ron Can you post a screenshot of ahrefs.com stats of what a common successful tiered link building looks like? (Of course, greying out sensitive data) I have struggled in a few domains to increase the number of links. Links decreased although I kept building them every day.
Perhaps a screenshot doesn't help. Maybe it's indexing of the links?
@audioguy - ahrefs and majestic will only show direct links built to a website, not a tiered linking profile. If you are suffering link loss, all that means is you must increase your direct links to make up for that loss. It's that simple.
No I don't. It will cause SER to reject a lot of links. With no PR filter you will get a natural dispersion of both high and low PR sites...and avoid unnatural concentration with particular platforms.
There are almost no outbound links on these platforms as these are brand new properties with a brand new article on a brand new page created by you.
p.s. - You really need to understand what you are building. If you take the time to visit some of these pages where you build links, you would have never asked these questions. Especially the OBL question.
i have scraped url list and i want to import those urls in my all projects but how? because
i have 20 projects so should i select one by one and import them or any
idea to import ithem in only once and all project use them?
when i will verify urls in a week of lower than T1 then should i check those boxes or any one of them? don't remove urls remove after first verification try
and how to know that when verification is ended of any particular project? when submitted url become 0? or something else
@ron Ok, that makes sense. Do you use any of those tools and try to duplicate what's happening there (not the sources of their backlinks but their link velocity)? Or you always use your template 5 to 10 to 20 based on the rankings in Google?
Was wondering if you could comment on my settings per your diagram.
In the Options tab, I have the following checked for all Tiers. This was the recommendation from one of those GSR help videos, but would like to know what you have these set to for your successful campaigns using your tiered diagram?
Skip sites with more than 100 outbound links. Skip sites with a PR below 1 Skip also unknown PR Avoid posting URL on same domain twice.
Ron - I got my first tiered project rolling for a website several weeks ago, and the 3 main money pages I am targeting are raising through the serps. From the not in the 500+ in goog to the 100-200 slots (some a little better even), so movement is all positive and it is still early days.
I presently have my kitchen sink projects to verify automatically, and I can see how that effects LPM, not that I have the all the tiers rolling. I remember reading something by you on this forum somewhere that you verify those kitchen sink links once a week. How do you do that exactly? The best I can come up with is to open each of the kitchen sink projects up and change the verification from disabled to verify after 1 minute. Is that how you do it, or do you have a better method?
Ron, just trying to under stand you. You said that "with no PR filter you will get a natural dispersion of both high and low PR sites...and avoid unnatural concentration with particular platforms."
Does that mean you check leave the "Skip sites with a PR below X" unchecked? If unchecked will, it still "skip also unknown PR" which gets greyed out and still checked.
Comments
:-B
i have read all suggestion that you give in this froum and thank you so much for useful info.
i have few questions..
1. How to delete profile links from T1? because i don't want to build T2 for profile links
2. how to see log of any particular project?
3. verification setting for different Tiers..
T1 - automaticaly (also Tick on re-verify existing backlink)
T2 - custom time 5000 minutes (Tick on don't remove urls (check hint))
is that right?
and please Tell me how to setup verification setting for T3 and kitchen Tiers.?
Thanks.
@baba - You can delete any links you want by right clicking on project, show urls>verified, and then highlight and delete whatever you want. The log is universal, not by project - or at least I thought so. T1T2T3 I set to automatic 1440, T1AT2AT3A I have it disabled and do it myself once a week. Just click the box to arrive at 'disabled'.
@dimitribanks - I use the same anchors completely throughout the project. This can include secondary anchors as well. I want the theme to be the same at all levels. Yes, you can always expand the anchors to a bigger list, just make sure they are thematically related.
No I don't. It will cause SER to reject a lot of links. With no PR filter you will get a natural dispersion of both high and low PR sites...and avoid unnatural concentration with particular platforms.
There are almost no outbound links on these platforms as these are brand new properties with a brand new article on a brand new page created by you.
p.s. - You really need to understand what you are building. If you take the time to visit some of these pages where you build links, you would have never asked these questions. Especially the OBL question.
and
i have scraped url list and i want to import those urls in my all projects but how?
because i have 20 projects so should i select one by one and import them or any idea to import ithem in only once and all project use them?
when i will verify urls in a week of lower than T1 then should i check those boxes or any one of them?
don't remove urls
remove after first verification try
and how to know that when verification is ended of any particular project?
when submitted url become 0?
or something else
Was wondering if you could comment on my settings per your diagram.
In the Options tab, I have the following checked for all Tiers. This was the recommendation from one of those GSR help videos, but would like to know what you have these set to for your successful campaigns using your tiered diagram?
Skip sites with more than 100 outbound links.
Skip sites with a PR below 1
Skip also unknown PR
Avoid posting URL on same domain twice.
thanks.
I presently have my kitchen sink projects to verify automatically, and I can see how that effects LPM, not that I have the all the tiers rolling. I remember reading something by you on this forum somewhere that you verify those kitchen sink links once a week. How do you do that exactly? The best I can come up with is to open each of the kitchen sink projects up and change the verification from disabled to verify after 1 minute. Is that how you do it, or do you have a better method?
Does that mean you check leave the "Skip sites with a PR below X" unchecked? If unchecked will, it still "skip also unknown PR" which gets greyed out and still checked.