@thangben are you using private (or at least semi-dedicated) proxies? If you setup your project _exactly_ like mine, then proxy could be the differentiator. BTW, I have 20 private proxies
And how many projects do you have? You won't get high LPM with just a few projects.
Lastly, I've replaced my CS with CB and got some further boost in LPM -- though you are not quite there yet.
@Kreist and @thangben I found it really depends on what type of projects you are running and how many you are running. I was initially posting to articles, social network and wiki only and keeping everything very tight.
When i added my kitchen sink projects lpm went up over 100 for the first time and now I am up to over 20 projects with more Kitchen sinks I have just peaked at my best:
That settles down to 140-150 most of the time and even down to 40-50 when the kitchen sinks have finished posting for the day.
So definitely look at your project mix, the number of projects running and optimize them all by turning off those not performing.
And, BIG and.., don't lose site of the fact that the lpm is worth jack shit without results.
jerryji : i am using 10 semi-dedicated proxies. I have more than 10 projects. Sometimes it uses over 1Gb of RAM.
I have picked all the best engines for my project. i even uncheck web 2.0s, because it very low success rate on my end with web 2.0s.
I have cloned some of my projects to get more links verified.
My keywords list is over 200k. i am using CB also.
this morning i test some project with Global list ( still dont understand very clearly about global list). will report my result at the end of the day.
for tier 1: verify custom at 1440.
for tier 2: verify custom at 5000. By doing this i hope SER has more time to post.
For all most a week i have tested your set up. the only 5 minutes i saw my GSA SER at 100 lpm.
I have change the option like Ozz told me. Let see if i have better verified link. For now, LMP still very low it around 5 lpm. . But i think i counter has problem. I did a quick math, i could see the submitted links are more than the " S" status a lots. .
what sense does it make to have in Project Options
use Url from Global Sites list if enabled
Checked for Submitted??
I perfectly understand for Verified, however submitted makes no real sense to me, cause only the sucessfull submission will go over to verified, i understand it would boost the LPM, however it wont boost the verficated links, or am i wrong in this one?
i think he means to use the GSA Indexer on a different machine as it could use a lot of your bandwith and CPU if configured for maximum results (no filtering, full indexing mode, etc.) with lots of threads.
jerryji I just read your thread and love the images of your setup. How are doing with this setup in SERPS using it?
I see you have 3 tiers. I'm assuming tier1 goes to the money site, links produced from tier1 go to tier2 and links produced from tier2 go to tier3, correct?
I'm interested in this too, also, I'm using the latest setup posted here after starting again building Links with GSA SER and wonder about two things:
1. Should really only about 6 G00gle SE from various countries be chosen be used as search engines or wouldn't it be better to add more and also other SE like yahoo for example
2. I have 10 proxies, I don't want to get them banned fast, in this aspect, does it matter how many SE I chose and if they are all from Google or not??
@ron, I have indexification api. But b/c of this post, I unselected send to indexer services on all projects. The problem is, i really don't know exactly how and when to send the verified links to indexificaiotn on my own. i don't know how I would keep track of what I had sent and what is new links to send. Any help from anyone? BTW: My LPM is climbing today just from adjusting my settings from this post.
I'm not sure what you are doing. I was referring to GSA Indexer. I still send mine to Lindexed via API, and if you have an API key with Indexification, I would be utilizing that. Again, I was referring to using GSA Indexer as a separate thing (not on the same pc you use to run SER) because they each need their own space.
You are about to receive the best advice that every newbie receives here:
Always, always, check the forum for threads on your topic by using these two methods:
1) First see if you are lucky - your topic might already be in the Category section on this forum. Look in the right margin, at the very top, right under the big blue shiny button that says New Discussion. Click on Category, and look for a big list under Popular Tags. You are in luck. At the bottom there is a tag for indexer. I'm never that lucky. So I usually use this next thing to find my answers...
2) Use the google search command to hone in on exactly what you want: site:forum.gsa-online.de/ "stick your search phrase here" This is my favorite because you can get very precise with your search phrase.
Lastly, as a newbie, it is your responsibility to catch up. These are the first threads I would read:
LyndonMcMan007 you can try run it once a week , or use service like linklicious . This is what I do from now on . Links getting send to them by the program using their API without taking much memory . On linklicious side pretty cool new 2.0 site and support is good .
Comments
And how many projects do you have? You won't get high LPM with just a few projects.
Lastly, I've replaced my CS with CB and got some further boost in LPM -- though you are not quite there yet.
When i added my kitchen sink projects lpm went up over 100 for the first time and now I am up to over 20 projects with more Kitchen sinks I have just peaked at my best:
That settles down to 140-150 most of the time and even down to 40-50 when the kitchen sinks have finished posting for the day.
So definitely look at your project mix, the number of projects running and optimize them all by turning off those not performing.
And, BIG and.., don't lose site of the fact that the lpm is worth jack shit without results.
At what point do you limit your kitchen sinks for the day?
Cool. Thanks
Low lpm :
My option:
http://www.freeimagehosting.net/o4nhj
Tier 1:
http://www.freeimagehosting.net/oz9f4
Tier 1 Option
http://www.freeimagehosting.net/kwig6
http://www.freeimagehosting.net/2ks5y
Tier 2:
http://www.freeimagehosting.net/mdp2d
Tier 2 option:
http://www.freeimagehosting.net/ulc12
This is the result i got : http://www.freeimagehosting.net/pc916
First day was very impressive. But the days after that you can see. very low verified link.
sorry i dont know how to post image here.
what sense does it make to have in Project Options
use Url from Global Sites list if enabled
Checked for Submitted??
I perfectly understand for Verified, however submitted makes no real sense to me, cause only the sucessfull submission will go over to verified, i understand it would boost the LPM, however it wont boost the verficated links, or am i wrong in this one?
What exactly does "offline" mean? Can u explain that process a bit?
and it seems that your using the old version . try using latest version.v5.89
jerryji I just read your thread and love the images of your setup. How are doing with this setup in SERPS using it?
I see you have 3 tiers. I'm assuming tier1 goes to the money site, links produced from tier1 go to tier2 and links produced from tier2 go to tier3, correct?
1. Should really only about 6 G00gle SE from various countries be chosen be used as search engines or wouldn't it be better to add more and also other SE like yahoo for example
2. I have 10 proxies, I don't want to get them banned fast, in this aspect, does it matter how many SE I chose and if they are all from Google or not??
You are about to receive the best advice that every newbie receives here:
Always, always, check the forum for threads on your topic by using these two methods:
1) First see if you are lucky - your topic might already be in the Category section on this forum. Look in the right margin, at the very top, right under the big blue shiny button that says New Discussion. Click on Category, and look for a big list under Popular Tags. You are in luck. At the bottom there is a tag for indexer. I'm never that lucky. So I usually use this next thing to find my answers...
2) Use the google search command to hone in on exactly what you want: site:forum.gsa-online.de/ "stick your search phrase here" This is my favorite because you can get very precise with your search phrase.
Lastly, as a newbie, it is your responsibility to catch up. These are the first threads I would read:
https://forum.gsa-online.de/discussion/2324/helpful-advice-if-new-to-gsa-ser/p1
https://forum.gsa-online.de/discussion/3204/my-compiled-list-of-tips-notes-threads-resources-for-using-ser/p1
https://forum.gsa-online.de/discussion/155/inofficial-gsa-search-engine-ranker-faq/p1
Some other threads which could help:
https://forum.gsa-online.de/discussion/2930/ser-tiers/p1
https://forum.gsa-online.de/discussion/879/guide-high-quality-campaign/p1
https://forum.gsa-online.de/discussion/3698/indexing-things-i-have-learned/p1