@rodol - Every 5000 minutes for tiers 2 and lower, and automatic on tier 1. There aren't that many links being built on tier 1, so verification on tier 1 really doesn't slow the submissions.
sonic81
edited January 2013
do you guys find your LPM drops after a few days of running hte same projects in GSA? i was at 40 LPM now down to 15 LPM haven't changed any settings really...
Is it because it runs out of new sites to post due from keywords? i'm using about 2k keywords
ron SERLists.com
edited January 2013
I don't think it is because of keywords. I would bet the ranch it has more to do with consistent internet speed.
ron SERLists.com
edited January 2013
Sorry dup post.
AlexR Cape Town
I know that links are checked up to 5 days...before being discarded. I'd like it to check it once on day 2.5 and once at day 5 before it get's tossed.
1) What timeout would I use? 1440x2.5? or 1440x3? (so somewhere in the middle)
2) Surely it must auto check on the 5th day, regarding of your verification settings, (unless you have do not verify ticked?)
sonic81
I actually verify every day (1440 minutes).
@ron perhaps but I doubt it because this is the first time I've noticed it consistently and also I live in Hong KOng it's a small city geographically high population very dense. Internet is the 3rd fastest in the world here I live right in the CBD so super fast and reliable.
never had a down day before...
Ozz
i also verify every 1440 minutes.
just do whatever what suits best for you and test if 2.5 or 3 works better for you.
AlexR Cape Town
@Ozz - do you know if it verifies on the 5th day automatically? Otherwise how does it know if to delete URL or not? So it must ignore the custom setting if custom setting is greater than 2.5 days?
sonic81
hmm i'm down to only 7 links per minute now without any setting changes. anyone got any suggestions? i've spent the last hour ploughing through settings haven't spotted anything...
jiggsaw
I finally got my LPM to around 100. This is using several projects. I have a question for LeeG and others pushing high submission numbers. Have any of you guys been testing out maxing submissions/LPM just using a single project? If you have, I'd love to hear your results.
LeeG Eating your first bourne
5.01 has been a lpm killer
Either that or changes I made yesterday to increase verified have killed it for me
Im not going much over 72lpm.
Have to knock that on the head with my normal large hammer
But, thats also the joys of lots of testing trying to get the max out out the software, good days and bad days
Submitted to verified ration today is about 1 in 3
sonic81
Upgraded and in faster again. Saw there was a bug fix in submission in the notes thanks @sven
krushinem
hi guys; what is a good proxy-threads ratio-providing that you have decent proxies.
krushinem
@jiggsaw I have a machine with 50 projects running and for 1 day My lpm stuck between 250 and 300.
I used some the settings discussed in this thread.
I think that the best thing that you can do to get a great lpm is to post to platforms where you have a high # of verifed submissions eliminating the the ones that don't have high numbers.
Most important is the rig and proxy speed-though
LeeG Eating your first bourne
See, another has found the secret formula to ser
Time + Effort = high lpm and verified
jiggsaw
@krushinem I have my lpm up to 175 now and I'm comfortable with that. I'd still like to know if anyone has done any lpm testing using a single project though.
blackhat
im at 50lpm....can't seem to tweak it any higher ill pay anyone 100$ paypal if they can help me bring it up to 150+ PM me.
hyde
@blackhat Have you read the posts on the forum about tweaking? @LeeG has shared a lot of valuable information. You should post your specs so we can help you.
Finally got my copy of GSA CB, and this is what it can do
blackhat
'
also using CB, stock mode.
vps specs:
xeon 4 core
4gb ddr3 ram
1gbps uplink
30 semi private buyproxies proxies
it used to be lower so i applied some of Lees tips which boosted it up.
sonic81
Try changing the number of SE's down from 156 to 5 it worked wonders for me. Then also change the engines you are submitting to based on your verified / identified rate.
thats the next thing i did which was use 5 different google engines let it run for about an 1.5 hours and its still around 41-50 lpm range. It would spike up to 120ish stay there for a few seconds and just slowly drop from there down to 41-50. Pulling my hair out
rodol
you need to post a picture of the platforms you have selected to see if your settings are correct but anyways.
uncheck identified and verified, just check submitted
you have too much filters, why you don't want to post on moderated blogs, you don't know if your links will be approved, I have automated links getting approved... even the owner of the blog sometimes answer my questions and ask me back.
remove all those filters and just use bad words links filters like, porn blowjob viagra and thinks like that.
the custom time between search engine, use at least 5-10, 3 is too low
perseous
@LeeG : still can't believe some one can get that success with social bookmark using no captcha service. I usually getting 1 verified on 100 failed with SB! (with CB) could you inform more about your technique getting those links(like exact engines, custom list or not...)? I would very appreciate.
LeeG Eating your first bourne
Yea shore
I will just back up my engines
My site lists
My keyword lists
Then save you the effort of learning how to use the software
Believe what you like, recently there was another member on the forums hitting 400k submissions a day who had followed my tips and made the effort to learn how to use ser
perseous
@LeeG : I'm so interested. could you inform more? you're selling your tips or lists?
ron SERLists.com
Yeah Lee, I think I broke through. Hitting the 200k club and know what 200LPM feels like - believe it or not, with no site lists or imported URLs. Just SER out of the box.
But I am having issues where SER freezes even though I'm only at 1/4 RAM and 1/4 CPU, so I don't know what to make of it.
This is all completely new territory for me. There are new headaches that come with building that many links.
I kind of feel like maybe you did a month or two ago when it all started to happen. It's great, but a pain in the ass at the same time.
LeeG Eating your first bourne
@perseous Im not selling anything. The above comment is sarcasm
Learn to use the software and dont expect to be spoon fed
Spend the time learning how to use the software
AlexR Cape Town
@TheOrbital - see @Ron's comment about the Freezing. I'm not the only one. (BTW - this refers to his program that restarts SER and CB when it crashes...I asked him to modify it so it can restart SER when it freezes as this seems to happen more than crashing!)
rodol
@ron when you say your SER freezes you mean that you have to close it with task bar, or the computer become very slow handling SER.
ron SERLists.com
Close it with task bar. If it was the other, it would be a CPU/RAM issue, but like I said, I'm not even close to those limits.
I am now running scheduler at 3 projects at a time for 15 minutes, and that seems to be working much better. I never thought I would say this, but I am ecstatic to see SER not using all its threads.
Comments
Sorry dup post.
5.01 has been a lpm killer
Either that or changes I made yesterday to increase verified have killed it for me
Im not going much over 72lpm.
Have to knock that on the head with my normal large hammer
But, thats also the joys of lots of testing trying to get the max out out the software, good days and bad days
Submitted to verified ration today is about 1 in 3
I used some the settings discussed in this thread.
I think that the best thing that you can do to get a great lpm is to post to platforms where you have a high # of verifed submissions eliminating the the ones that don't have high numbers.
Most important is the rig and proxy speed-though
See, another has found the secret formula to ser
Time + Effort = high lpm and verified
I usually getting 1 verified on 100 failed with SB! (with CB)
could you inform more about your technique getting those links(like exact engines, custom list or not...)?
I would very appreciate.
Yea shore
I will just back up my engines
My site lists
My keyword lists
Then save you the effort of learning how to use the software
Believe what you like, recently there was another member on the forums hitting 400k submissions a day who had followed my tips and made the effort to learn how to use ser
Yeah Lee, I think I broke through. Hitting the 200k club and know what 200LPM feels like - believe it or not, with no site lists or imported URLs. Just SER out of the box.
But I am having issues where SER freezes even though I'm only at 1/4 RAM and 1/4 CPU, so I don't know what to make of it.
This is all completely new territory for me. There are new headaches that come with building that many links.
I kind of feel like maybe you did a month or two ago when it all started to happen. It's great, but a pain in the ass at the same time.
@perseous Im not selling anything. The above comment is sarcasm
Learn to use the software and dont expect to be spoon fed
Spend the time learning how to use the software
Close it with task bar. If it was the other, it would be a CPU/RAM issue, but like I said, I'm not even close to those limits.
I am now running scheduler at 3 projects at a time for 15 minutes, and that seems to be working much better. I never thought I would say this, but I am ecstatic to see SER not using all its threads.