Skip to content

GSA constantly verifying

kevinryankevinryan
edited February 2013 in Need Help
Hi!

I've been lurking for some time and found tremendous help on getting my submissions from 10LPM to over 120LPM. Thanks to everyone who has posted all this valuable information. I will try to start giving back!

I've recently switched over to scheduler mode and not sure if it's related but after about 2-3 minutes, all my projects switch to verify mode which kills the submissions. 

Running about 30 projects (10 every 30 minutes).

Mostly 3 tiered. 

Tier 1 set to verify every 1440 minutes
Tier 2 set to verify every 3000 minutes
Tier 3 set to never verify (just changed that)

It's mostly the tier 2 projects but they seem to be verifying constantly and it's really killing my LMP (100+ at peak, down to about 30 with all the verifying. 

Any thoughts?

Comments

  • SvenSven www.GSA-Online.de
    Do you use any "pause project" settings in the projects?
  • kevinryankevinryan
    I do but the thresholds are quite high and do not normally pause.

    It seems much better today. I had it consistently over 200LMP most of the day then it froze...back to a good clip after a reboot.

    I think since I removed the "verify" on the bottom tier projects, that made a difference since there were tens of thousands of links to verify.
Sign In or Register to comment.